The racer asked
i am racing at mb models give me a full starter setup sheet
Miles, So Dialed's RC setup AI
I can give you a B6.3 starter sheet, but I can’t confirm MB Models’ current surface or grip. This baseline assumes medium-grip, hard-packed dirt; if you’re racing carpet or astroturf, tell me, because the tire and ride-height choices change.
- Ride height: 19 mm front and rear. Camber: -2° front and rear. Front toe: 1° toe-out. Rear toe: +3°. These are dirt/clay baseline values.
- Tires: Rear Schumacher Mezzo, yellow compound, medium insert. Start with no front insert.
- Suspension: Front shocks in the outside tower holes. Rear shocks in tower hole 3, mid-out, and arm hole B, middle. Run no front or rear anti-roll bar to start.
- Rear differential height: 0 mm for medium-grip hard-packed. Keep the kit chassis, body, and other settings as supplied.
The track-specific setup data doesn’t establish a shock-oil choice for this surface, so keep your kit oils for the first run rather than guessing. If it bottoms on landings, raise ride height; if it traction-rolls, lower it slightly. Check with the track what surface and tire rules apply before changing tires.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B6.3 questions
What shock oil should I run on a Team Associated RC10 B6.3 for high-grip carpet?
For the RC10 B6.3, a common high-grip carpet starting point is 45 wt front and 35 wt rear. Other high-grip carpet setups also use 35–40 wt front and 30–32.5 wt rear, so treat...
What shock oils for Team Associated RC10 B6.3?
For the RC10 B6.3 kit setup, start with 45 wt front and 35 wt rear shock oil, using Team Associated oil as the reference. Those are the model’s default oil weights. Thicker oil...
What pinion gear for RC10 B6.3 with a 17.5T motor?
For your Team Associated RC10 B6.3 with a 17.5T motor, start with a 31T pinion and the stock 78T spur. That gives a 6.54:1 final drive ratio; confidence is high. After a short...
