The racer asked
For more rotation ?
Miles, So Dialed's RC setup AI
For more rotation on the FT9, reduce the **Rear Suspension: Toe
- static** (less rear toe-in). The kit setting is 2.5 degrees, and the team's guide puts high-traction running at 2 to 3 degrees. Dropping to 2 degrees frees the rear to turn in.
Rear toe-in adds rear stability and forward traction. Backing it off lets the rear rotate more, but the car gets less traction on corner exit.
- **Rear Suspension: Toe
- static**: move from 2.5 to 2 degrees, then check the car again.
- **Rear Suspension: Toe
- active shims**: change from the kit 1 mm to 0 mm for more steering when you need it. The team's guide says 0 mm suits high-traction tracks where you want more steering.
- Body & Chassis: Weight balance: bias weight rearward for a more aggressive car with more steering. The team's guide says about 68% forward is the neutral starting point.
- Drivetrain: Diff fluid: go thinner, toward 100,000 to 200,000, for more steering off power. This costs some traction.
Watch for loose exit. If the rear gets too free on throttle, go back toward 2.5 degrees and use a lighter diff or weight change instead. Only change one setting at a time.
Is the car pushing on corner entry or losing the rear mid-corner, and is your track high or low grip? That tells me which of these to try first.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
