The racer asked
What is the advantage of using 69t spur vs 72t spur with 17.5t motor?
Miles, So Dialed's RC setup AI
A 69T spur gives taller gearing than a 72T spur with the same pinion: about 4.2% more rollout, so it can gain speed on a long straight. It also gives up some wheel torque, which can mean softer acceleration and more motor heat if the gearing is too tall.
The 72T spur is the safer choice for a technical track or if you want stronger low-speed punch. Try 69T when the car is reaching its limit before the end of the straight, then check motor temperature after a short run. I can compare the exact final-drive ratios if you tell me your pinion size.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B7.1/B7.1D questions
What setup changes for a Team Associated RC10 B7.1 on low-grip astroturf?
There isn't a public low-grip astroturf setup to copy. The only astroturf setup is medium grip, so I'd start from it and make a few changes toward more traction. Those changes are...
How can I get more low-speed steering on a Team Associated RC10 B7.1/B7.1D?
For a sharper steering response at low speed, try KPI 3 if you’re currently at KPI 0. The B7 setup tips describe KPI 3 as the most direct steering feel, while KPI 0 is less...
What pill setting for wide C and D blocks on RC10 B7.1/B7.1D?
For a wide rear pivot on the B7.1/B7.1D, set the C- and D-block inserts to the positions that give the widest hinge-pin spacing, and mirror the left and right sides. There isn’t...
Which tires for a freezing-cold track on an Associated RC10 B7.1/B7.1D?
For a freezing-cold track, start with a soft or super-soft compound. Cold tires need a softer compound to conform to the surface and generate grip; the right tread still depends...
Gearing for RC10 B7.1 with Hobbywing V10 G5 17.5T?
For the RC10 B7.1 with the Hobbywing V10 G5 17.5T Torque, start with a 31T pinion and the stock 78T spur. That gives a 6.54:1 final drive ratio; confidence is high for this...
How do I set up a Team Associated RC10 B7.1/B7.1D for a Nor‑Cal track?
Nor-Cal’s name alone doesn’t tell me the surface or grip, so there isn’t one reliable track-specific setup. If you mean a low-grip clay layout, use these B7.1D settings as a...
