The racer asked
need more low speed steering
Miles, So Dialed's RC setup AI
For a sharper steering response at low speed, try KPI 3 if you’re currently at KPI 0. The B7 setup tips describe KPI 3 as the most direct steering feel, while KPI 0 is less direct.
If you still want more, change front toe one step toward toe-out: the recommended starting range is 0 to 1 degree toe-out. More toe-out can help the car point into tight corners, though it may make it wander more on the straight. Test one change at a time so you can tell which helped.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More RC10 B7.1/B7.1D questions
What setup changes for a Team Associated RC10 B7.1 on low-grip astroturf?
There isn't a public low-grip astroturf setup to copy. The only astroturf setup is medium grip, so I'd start from it and make a few changes toward more traction. Those changes are...
What pill setting for wide C and D blocks on RC10 B7.1/B7.1D?
For a wide rear pivot on the B7.1/B7.1D, set the C- and D-block inserts to the positions that give the widest hinge-pin spacing, and mirror the left and right sides. There isn’t...
Which tires for a freezing-cold track on an Associated RC10 B7.1/B7.1D?
For a freezing-cold track, start with a soft or super-soft compound. Cold tires need a softer compound to conform to the surface and generate grip; the right tread still depends...
RC10 B7.1: 69T vs 72T spur with 17.5T motor — which is better?
A 69T spur gives taller gearing than a 72T spur with the same pinion: about 4.2% more rollout, so it can gain speed on a long straight. It also gives up some wheel torque, which...
Gearing for RC10 B7.1 with Hobbywing V10 G5 17.5T?
For the RC10 B7.1 with the Hobbywing V10 G5 17.5T Torque, start with a 31T pinion and the stock 78T spur. That gives a 6.54:1 final drive ratio; confidence is high for this...
How do I set up a Team Associated RC10 B7.1/B7.1D for a Nor‑Cal track?
Nor-Cal’s name alone doesn’t tell me the surface or grip, so there isn’t one reliable track-specific setup. If you mean a low-grip clay layout, use these B7.1D settings as a...
