What setup should I use on a Tekno EB48 2.1 for mid-to-high grip hard-pack with big jumps?

Asked November 8, 2026

The racer asked

Mid to high grip setup big jumps hard pack smooth

Miles, So Dialed's RC setup AI

For a Tekno EB48 2.1, start from the kit setup and keep the suspension controlled for the big jumps, without making it so stiff that it loses grip on the hard pack. Track-specific setups from other EB48 2.1 racers give a useful baseline, but treat them as starting points, not a guaranteed setup.

  • Front shock oil: 550 or 650 cSt are reported for medium-grip hard-packed tracks. Try 650 cSt first; the right choice depends on your pistons and how the car lands. On a smooth track with big jumps, smaller piston holes generally suit the conditions better than larger holes.
  • Front axle height: Keep it at 0 mm. The model’s hard-pack setups use 0 mm, and a higher axle can reduce steering on high grip.
  • Rear chassis brace: Keep it installed for medium-grip hard pack.
  • If it bottoms on landings: Raise ride height slightly, or add damping with heavier oil or smaller piston holes. Stiffer springs can also help the car jump and land better.

Change one thing at a time. Too much damping or spring stiffness can make the buggy harsh and cost grip; if you share what it does on jump landings and your current shock setup, I can narrow down the next change.

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Get setup help from Miles, our RC Setup AI that’s been trained on this car.

Free, and your first answer needs no sign-in.

More EB48 2.1 questions

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.