The racer asked
Mid to high grip setup
Miles, So Dialed's RC setup AI
For a mid- to high-grip dirt or clay track, start with the EB48 2.1’s hard-packed/clay settings and lower the ride height if grip is very high. These are starting points reported by other EB48 2.1 racers, not a setup I can see on your car.
- Ride height: about 24 mm front and 25 mm rear for high-grip clay; medium-grip hard-packed setups commonly run 24–25 mm front and 25–27 mm rear.
- Camber: -2° front is a common hard-packed and clay value.
- Front toe: try -1° on hard-packed, or -0.5° on high-grip clay.
- Shock oil: examples use 550–650 cSt front and about 550 cSt rear on medium-grip hard-packed; high-grip clay examples use 600 cSt front and 550 cSt rear.
- Center diff case: use the high-grip case as a starting point; it’s common in both medium- and high-grip examples.
Change one thing at a time. If the car traction-rolls, reduce grip or roll with a stiffer bar, harder tires, or slightly lower ride height; if it feels edgy, back off that change. Astroturf settings differ, so the surface type matters.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
