Best Team Associated RC10 B6.2 setup for Tony's Hobbies clay track?

Asked October 29, 2026

The racer asked

Whats a good setup for this buggy at Tonys Hobbies' clay track

Miles, So Dialed's RC setup AI

I don’t have a Tony’s Hobbies-specific B6.2 setup, but as a starting point for a 2WD buggy on clay, try 19 mm ride height front and rear, −2° camber, 1° front toe-out, 3° rear toe-in, 2° anti-squat, and 25° total caster. These are general dirt/clay baseline settings, not a confirmed setup from that track.

Tires will make a major difference on clay. For a clean, high-grip indoor surface, try slick clay tires such as AKA Void or Pro-Line Bald Eagle. If the surface is dusty or less consistent, use a tire with a tread suited to hard pack rather than a slick. The Void is listed for low-dust indoor clay, while the Bald Eagle is intended for very high-grip clay.

Start with those settings and change one thing at a time. If the buggy traction-rolls, try a slightly lower ride height or a harder tire compound; if it lacks steering, try a softer 2WD front tire. Track bite can change during the day, so reassess after practice.

Follow-up

It is recommended to use TDK Gen 2 tire sauce

Miles

Thanks for the correction. For the B6.2 at Tony’s Hobbies, use TDK Gen 2 tire sauce as the track-recommended prep. I don’t have a verified application time or front/rear coverage for that track, so follow the sauce label or Tony’s Hobbies’ instructions rather than guessing. Start with the same prep on each run, then adjust only if the tires feel too grabby or the buggy still lacks traction.

Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.

Have a question?

Get setup help from Miles, our RC Setup AI that’s been trained on this car.

Free, and your first answer needs no sign-in.

RC Setup App icon

Free to start · iOS & Android

Save this change in the RC Setup App

Track every change, get AI feedback that knows your exact setup. Racers have tracked 100,000+ setups.