The racer asked
How to get more stability in bumps?
Miles, So Dialed's RC setup AI
For more stability in bumps on the TLR 8IGHT-XE 2.0, start by making the shocks move more freely: use slightly lighter shock oil, or a piston with more/larger holes. That helps the tires follow the surface instead of skipping across it. The kit setup lists 35 wt rear oil, so if yours is heavier, try moving down one step from what’s installed.
Make one change at a time, then test the same bumpy section:
- If it still gets unsettled, angle the shocks inward at the towers or outward at the arms.
- If the chassis bottoms out or the car gets knocked off line by deep bumps, raise ride height a little. Higher ride height can help over rough terrain, but raises the center of gravity.
- If it wanders through bumps, more front caster can help it track straighter.
These are general off-road setup directions; the available XE 2.0 setup data does not give a specific rough-track shock recipe. Watch for the trade-off: damping that is too light can make the car bounce or bottom out. If you share your current front and rear oil, pistons, and ride height, I can suggest a more targeted first adjustment.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
