The racer asked
What weight oil for front and rear as a starting point on astro
Miles, So Dialed's RC setup AI
For a Kyosho Inferno MP11e, start with 500 cSt front and 550 cSt rear on astro, assuming the kit-baseline setup. Those are the model’s listed starting values; I don’t have a specific astro-track setup to recommend beyond that baseline.
Shock oil controls how quickly the suspension moves. Thicker oil adds damping and support, while lighter oil lets the suspension react more freely. Kyosho’s MP10/MP11 shock-oil range includes 300–850 cSt.
After a few laps, change only one end at a time. If the car feels harsh or skips over bumps, try lighter oil there; if it bottoms out or feels under-supported on landings, try heavier oil. Compare cSt values when switching brands, since “wt” labels vary by brand.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More Inferno MP11e questions
How can I lower the rear ride height on a Kyosho MP11e to below 33 mm?
I haven't given you ride heights earlier in this chat, so I'll go by the class baseline and what other MP11e racers ran. For a 1/8 scale 4WD buggy on dirt/clay, the typical...
What is a good baseline setup for a Kyosho Inferno MP11e?
Assuming you’re running the Kyosho Inferno MP11e on dirt or clay, use this 1/8-scale 4WD buggy baseline: 23 mm front and 26 mm rear ride height, -3° front and -2° rear camber, 1°...
