The racer asked
Whats the best setup for high bite carpet
Miles, So Dialed's RC setup AI
For a high-bite carpet baseline on the R1WURKS R1B Mark 1, start with Pink-compound tires, a 1.1 mm front anti-roll bar, and a 1.4 mm rear anti-roll bar. These settings come from high-grip carpet setups used on this car, so treat them as a starting point and tune for your track.
- Tires: JConcepts PinSwag front and Nessi rear, both Pink compound.
- Suspension: 4 mm front trail; front shock mounts Out on both the arm and tower; rear shock tower Mid-out.
- Geometry: rear camber -2 degrees; rear outer camber-link shims 0.5 mm; rear hub outer mount shims 2 mm.
- Ride height: 14 mm front and 13.5 mm rear. Keep the kit wing and standard chassis flex.
The bars and firmer tire choice help keep the car composed when the carpet has strong grip; the trade-off can be a more abrupt feel or reduced compliance. If it traction-rolls, try reducing the front bar one step first. If it pushes, adjust one front-end setting at a time and retest.
Answered by Miles, our RC setup AI. Check anything that affects safety or fitment against your manual.
More R1B Mark 1 questions
How do I raise or lower front hub height on an R1WURKS R1B Mark 1?
On the R1WURKS R1B Mark 1, front hub height is adjusted with steering-block shims. The available setup data lists shim options from 0 to 3.5 mm, but it does not specify a reliable...
Why does my R1B Mark 1 understeer on entry but snap into oversteer with push brake?
First reduce the brake strength in the ESC or radio, then test again. The sudden oversteer under push brake suggests the rear is losing grip when braking; changing the suspension...
